1
Place both headphones in the charging case.
2
Press and hold both buttons until the earphone LED's flash white.
3
Wait for the LED on each Melomania 1+ to blink blue three times.
4
The LED will then go back to the “breathing” white display.
5
At this point, you can release the buttons as the reset procedure is complete.
6
The earphones will no longer remember any of the devices that have previously paired with them.
7
When removing either 'Melomania 1+ L' or 'Melomania 1+ R' after a reset, you will hear the voice prompt saying “Waiting to Pair”.