April 19th 2022
(V2.3.6)
Updates:
-
After auto power-off the earbud now correctly responds when manually powered on.
-
When just one earbud is being used it no longer disconnects when reaching 80% battery level.
-
Touch controls now adjust the volume of videos when using the iOS Photos App.
-
Touch indication tone is now muted when the touch control for Play/Pause is disabled via the Melomania App.
-
Earphones now save the volume last set before disconnecting from a device. This was a requested feature from our customers.
-
48kHz sample rate enabled. Previously disabled due to a bug, since it has now been solved, we can enable this in the firmware.
-
Improved operation with smart TVs and compatible Bluetooth transmitters. Linked to the 48kHz sample rate enabled.
-
The aptX codec is now compatible with MacBook. Linked to the 48kHz sample rate enabled.
-
Voice prompt volume has been reduced. This was a requested feature from our customers.
10th August
(V2.1.9)
Updates:
-
Balanced EQ preset renamed to Immersive, the EQ curve is unchanged
-
Bass Boost EQ preset replaced by a new Neutral EQ preset
-
Improved operation of the app on/off control switches for volume up/down
-
Improved operation of auto power on/off and the associated LED indication
-
Volume is now fully muted when the volume is adjusted to the minimum setting
-
If the earbuds have Transparency on, this is now automatically switched off when the earbuds are replaced in the charging case
-
Improved volume control with TWS+ phones
-
Minimized background noise when Transparency is on or during a voice call.
9th August 2021
(V2.1.8)
Updates:
-
Improvement to Neutral EQ profile
3rd August 2021
(v2.1.7)
**Updates: **
-
Improved operation of auto power on/off and the associated LED indication
-
Bass Boost EQ preset replaced by a new Neutral EQ preset
-
Volume is now fully muted when the volume is adjusted to the minimum setting
-
If the earbuds have Transparency on, this is now automatically switched off when the earbuds are replaced in the charging case
-
Improved volume control with TWS+ phones
-
Minimized background noise when Transparency is on or during a voice call.
4th April 2021
(v1.4.2)
Updates:
-
Auto-connect is now quicker, at around 6 seconds.
-
Optimized power-off consistency when the earphones are placed in the charging case.
-
Earphones no longer automatically power off after 60 minutes of use on voice calls on a Windows 10 laptop/PC.
-
The current Audio Mode is now correctly displayed in the Melomania App.
-
During a system reset, the earphones return to the previous peer connection after 60 seconds, if a new connection is not found.
-
System reset optimized.
15th March 2021
(v1.3.1)
Updates:
-
Improved auto power-on reliability when taking earphones out of the charging case.
-
Improved auto power-off reliability when putting earphones into charging case.
-
Added “Waiting to pair” voice prompt on removal from charging case after a system reset, or when not previously paired.
-
Added battery power indication when only one earphone is powered on.
-
Improved call quality, increasing volume in the receiving device and reducing ambient noise.
-
Improved volume sync issues on specific Huawei and OnePlus phones.
-
Auto power-off disabled when transparency is on, and audio play is paused.
-
System reset no longer resets the voice prompt language to English.
-
Improved volume balance between left and right stereo channels.
25th January 2021
(v1.2.3)
Updates:
-
Improved Bluetooth connection stability and pairing.
-
Improved power management when earbuds are in the charging case, so any abnormal battery discharge is eliminated.
-
Touch control time increased from 3s to 8s to activate pairing.
15th January 2021
(v1.1.8)
Updates:
-
Extended the playing time by optimizing charging.
-
Reduced LED power consumption.
-
Improved battery charging management.
-
Fixed battery charge loss from factory.